The car cooling system is responsible for keeping the car safe on the road. It prevents hassles like overheating by distributing the heat evenly throughout the entire car. A poorly working cooling system would lead to costly auto repairs in the future. Help your car run hassle-free and prevent unwanted downtime by adopting these car cooling maintenance tips as follows:
Keep the Radiator Cap Tight
The radiator cap does more than keep the coolant intact. The pressure within the cooling system remains as it is because of the radiator cap. In case it starts heating up, allow it to cool down. The pressure might come out after screwing, so try to stay away while you’re adjusting the cap.
Keep the Radiator Spick & Span
Dirt and debris get within the vehicle’s cooling system. Ensure that it is checked while handing it over for service to the technician. Try to perform the radiator cleaning after every six months or so.
Water Pump Inspection & Maintenance
The Water Pump is the most critical component of the vehicle’s cooling system. The coolant moves through the radiator via a water pump and is responsible for regulating the engine’s temperature. Unfortunately, water pumps wear out over time, and water pump replacement is the quickest way to resolve these issues.
Fans, Belts & Hoses
The Cooling system consists of several fans, belts, and hoses. These components must work properly for the smooth working of the cooling system. Therefore, it’s vital to check these components every now and then to help the car run without any hassle.
Flush the Coolant
Did you know that the radiator needs to be flushed and refilled once 30,000 miles or more have been covered? This cleaning would help you get rid of the dirt, debris, or any unwanted contaminants present within the coolant.
If you possess sound technical knowledge, instead of taking the car to the mechanic for coolant replacement, get a new one from the online car parts and accessories store ‘The Auto Parts Shop‘ that brings premium quality coolant to you.
Inspect the Vehicle for Internal or External Leaks
Apart from external sections, including the radiator, water pump, engine coolant passages, and the heater hoses and core, look at the internal leaks. To inspect the internal leaks, you need a mechanic or a pressure tester to resolve them. Before performing any leaks, ensure that the engine is off and the car is cooling.
How to Top Up the Car Using Coolant?
Step 1:Avoid Using the Car Right Away
Park your vehicle on the ground and wait there for a few hours to let it cool down.
Step 2:Open the Hood & Find Out the Coolant Reservoir
If you haven’t done it before starting it, find the anti-freeze inside the car. The anti-freeze is a clear plastic tub with a colored liquid inside it. You would find a warning of “Caution” or “Hot” on it.
Step 3: Check the Coolant Levels & Mix Water with Coolant
Check the coolant levels as they must fall between minimum to maximum range. The coolant is to water ratio must have 50 percent coolant and 50 percent distilled water. If you don’t have distilled water, boil the water and allow it to cool before putting it inside the car.
Step 4:Fill the Radiator & Coolant Reservior to the Top
If the coolant radiator comes with the cap access, take it out and inspect the bottom of the radiator. Even the radiator consists of min and max lines. Fill the coolant to its maximum capacity and reinsert the cap.
Note: Check the coolant you’re buying is of top-quality, as investing in any coolant would impede your car’s working.
What’s the Price of the Car Coolant?
The car coolant price is generally affected by several factors. The primary ones include the type and size of the vehicle. The standard coolant cost generally falls between $100-$200.
Try to save money by getting quality parts from online car parts & accessories stores. For coolant changing, you can take your car to the mechanic if you don’t have sound knowledge or are unsure about the position of the coolant.
The Bottom Line
A well-maintained coolant would prevent your car from overheating. Perform the step-by-step procedure while filling the coolant inside the car. Don’t forget to get the high-quality fluid for your car and change it when necessary.