The Driveshaft looks like a rod that transmits the torque from the car’s engine to the wheels. The torque from different angles is transported to different driveline components. In such situations, the driveline assembly needs to remain smooth as the drive train axles go upwards and downwards. These move in the lateral direction when brakes and accelerators are applied. Over time the Driveshaft starts wearing out, fails, or breaks, and it’s vital to determine the driveshaft price while replacing the bad Driveshaft with a new one.
How Does the Driveshaft Axle Work?
Note that the front-wheel-drive vehicles don’t have driveshafts in them. It is basically the amalgamation of the transmission and axle, also known as the transaxle. In the case of 4 wheel or rear-wheel vehicles, both of them are distinct units. Hence, it is the responsibility of the drive wheel to deliver the turning motion dissipated by the transmission to the axle. The design of this component is tubular and is made of carbon or aluminum, making it robust and lightweight.
Parts of Driveshaft Axle
A driveshaft isn’t just a single component, but several components work together for the smooth working of the vehicle. Let’s have a look at each one of them:
Front-Wheel Drive
![Front-Wheel-Drive](https://blog.theautopartsshop.com/wp-content/uploads/2021/10/Front-Wheel-Drive-300x171.jpg)
The transmission present in the rear-wheel-drive generally transfers power from the engine to the car’s front wheels. This part is quite inexpensive in design and is sold to consumers at affordable rates. Front-wheel vehicles receive better gas mileage because the drivetrain has less weight than the rear Driveshaft. These devices offer better traction as the entire weight of the engine and the transmission moves to the front wheels. If you own a vehicle with a rear-wheel drive shaft, you’ll be able to ride in harsh weather conditions safely. Front-wheel drive vehicles undergo wear and tear than rear wheel vehicles, and attention must be devoted to such issues. Determine the driveshaft price and replace the old one with a new one.
Rear Wheel Drive
![Rear-Wheel-Drive](https://blog.theautopartsshop.com/wp-content/uploads/2021/10/Rear-Wheel-Drive-300x188.jpg)
Vehicles with a rear driveshaft are quite complex. The power generated by the transmission is moved to the rear wheels via a long driveshaft to the differential. The handle of the RWD is way better than the front-wheel drive, and a lot of difference would be observed in the turns and curves while driving.
Common Reasons of Driveshaft Failure
![Common-Reasons-of-Driveshaft-Failure](https://blog.theautopartsshop.com/wp-content/uploads/2021/10/Common-Reasons-of-Driveshaft-Failure-300x198.jpg)
Driveshaft failure takes place in rare cases. However, if it does, corrosion and stress are the underlying causes behind the failure:
Intense Vibrations and Shuddering
Intense vibrations and shuddering is the most common sign of transmission failure. The bushings or the U shaft start degrading. A possible reason could be excessive driveshaft vibration. As a consequence, the Driveshaft doesn’t bolt down properly, or the unit stays out of balance for a while—excessive vibration results in wear and tear of other driveshaft components.
Weird Noises
Strange noises are another possible reason behind a worn-out driveshaft. Poorly working bearing and bushing supporting the Driveshaft and U joint fails or wears out affects the working of the Driveshaft. In such cases, the vehicle starts producing squeaking, clunking, and rattling sounds and takes the car for a driveshaft replacement.
Shuddering During Acceleration
Are you noticing shuddering issues in your vehicle that take place while driving at low speeds or during acceleration? It is possibly due to failed driveshaft components. You might notice strange sounds during shuddering, and it is vital to get these issues checked to prevent issues from getting worse.
Issues while Turning
If you are suspecting issues while turning the vehicle, it is because the Driveshaft has deteriorated. A damaged driveshaft abstains you from proper wheel turning and imposes a limit while you’re trying to control your car. It is vital to give proper lubrication to the component as not doing so would damage them. Inspect the high-use driveshafts on a regular basis as excessive movements as they wear out prematurely due to excessive movements.
Problems such as a failed or broken Driveshaft shouldn’t be taken lightly and must be replaced for the vehicle’s proper working.
Driveshaft Labour & Part Costs
The cost of the Driveshaft is affected by various factors. It depends on the kind of vehicle you have, the shaft to be replaced, or whether it’s a single or two-piece shaft. The cost of front driveshafts commonly lies between $150-$250.The large rear driveshafts price starts from $250 and moves up to $400.You need to pay separately for the labor. Replacing the Driveshaft isn’t a hassle, and the entire job can be performed in an hour. Try not to miss the differentials and replace seals that were used during the job. Have a look at the driveshaft Yoke that moves into the transmission or differential.
How to Find the Driveshaft in Your Vehicle?
If you don’t know which kind of Driveshaft must be installed in your car, visit ‘The Auto Parts Shop.’Enter the make, year, and car’s model & you’ll find the right Driveshaft for your car. We bring durable driveshafts and their associated parts that will be delivered within a day. The driveshaft prices offered by the store are quite reasonable and bring quality parts to you.
The Bottom Line
Ignoring driveshaft problems would impede the working of your car. Driving a vehicle with a broken driveshaft could lead to costly repairs later. Get a new driveshaft and drive your vehicle smoothly on the road.