Categories
Trouble Code

P0138 Code: O2 Sensor Circuit High Voltage (Bank 1, Sensor 2)

There are more than fifty things that can affect the performance of your vehicle and illuminates the check engine light. These lights are a part of the OBD-II system and can indicate the faults in the components of the vehicles.

Definition of P0138 error code

The P0138 error code states as O2 Sensor Circuit High Voltage (Bank 1, Sensor 2).

Meaning of P0138 error code

Oxygen sensor 2 is the rear oxygen sensor that is connected with the catalytic converter. It measures the quantity of the air and fuel that is emitted by the catalytic converter to inspect its functioning. The voltage is the primary factor that decides the sound working of the catalytic converter.

oxygen_sensor

If the voltage is high, it indicates that the quantity of fuel is more in the mixture. The low voltage indicates the high quantity of air in the mixture. Hence, the rear oxygen sensor should generate a precise voltage of approximately .45 volts.
When the check engine light illuminates and triggering the P0138 error code, it implies that high voltage is flowing for more than 10 seconds and it also indicates that there is a lack of oxygen in the exhaust stream and enough fuel is present in sensor 2 on the bank 1of the engine.

Possible causes of the P0138 error code

Many factors can trigger the P0138 error code. Some of them are:

  • Defects or faults in O2 Sensors
  • Defects in air-fuel sensor
  • Defects in wiring
  • Faults in the connection to the oxygen sensor
  • Excessive fuel pressure
  • Corrosion in wiring
  • Shorting in wires
  • Clogged catalytic converter
  • Leaking fuel injector

Symptoms of the P0138 error code

These are the symptoms that are visible in the vehicle when your vehicle is triggered with the P0138 error code:

  • The engine may run lean during sensor testing
  • Hesitation on acceleration
  • The engine of the vehicle may lag or miss
  • Fuel economy fails
  • The vehicle goes on Rough idle condition
  • Engine dies or problem in starting
  • Foul fumes emitted
  • Check engine light illuminates

The seriousness of the P0138 error code

While driving in a short distance while your car is diagnosed with the P0138 error code, it will not create any problem. But you should detect the actual reason for the P0138 error code. This error code directly affects the fuel efficiency of the vehicle and this will affect the exhaust of the system. Running with a rich engine can directly affect the efficiency of the car.

How to check the P0138 error code?

When your vehicle is diagnosed with the P0138 error code, and to inspect the oxygen sensors bank 1 sensor, you need to follow these steps:

Check the corroded terminals: inspect the connecting wires from oxygen sensors to the catalytic converter, if they are corroded, shorted, or damaged.

Check the fouling of the sensor2: fouling is the indication for more fuel than oxygen in the air-fuel mixture. If your oxygen sensor contains more fuel than the oxygen it will emit a strong weird smell. Leakage on the exhaust system is also a primary reason for the fouling smell in the oxygen sensor.

oxygen_sensor

Check the electrical connections: inspect the damages and cracks in the exhaust pipes and the catalytic converter. Check if the wiring harnesses are in the good condition or they melt because of the closeness of warm exhaust parts. Check visually for the connections as well as using Ohm meter.

How to fix the diagnosed P0138 error code?

If your vehicle is diagnosed with P0138 error code, you need to diagnose the defective component that triggers the check engine light on because of P0138 error code.
Mostly the primary cause of the P0138 error code is the faults in the oxygen sensors. Check it or replace it. These faults can occur because of the wire connections, also inspect for the burnt, and damage wires of the oxygen sensors.
If there is a requirement for the replacement of the catalytic converter, do it. The leakage of the fuel injector should also be repaired.

Some other tips for troubleshooting the P0138 error codes are:

Clear the codes that are stored in the ECU and take a small test drive to check the voltage of the oxygen sensors. If the sensors go in high voltage this indicates that there are some faults in the oxygen sensors, and they need replacement.
If you are facing some issues of fuel efficiency, in your vehicle and your vehicle is triggered with the P0138 error code, then you must visit a mechanic and should check the defective components of the vehicle.

Categories
Trouble Code

HO2S Heater Resistance Bank 2 Sensor 2

The oxygen sensor is a mandatory factor that is used to regulate the performance of the engine. Oxygen sensors only regulate the engine performance after the sensors reach a certain temperature. A proper working engine generally takes 15 minutes to reach the required temperature.

The reading of the oxygen cylinder is needed just after the engine runs. The internal heaters are aligned with the sensors to heat up them more quickly than the engine. The monitor of the vehicle will acknowledge the temperature of the oxygen sensors by computing the resistance of the oxygen sensor. If the resistance of the oxygen sensors is out of the range the monitor will guess that the oxygen sensor is giving unsatisfactory results.

Like other several codes, P0060 is a DTC code that is generated when there is an issue in the operation of the oxygen sensor’s heater circuit.

What does the P0060 code mean?

If your vehicle is generating P0060 code, it means that the powertrain control module is detecting a problem in the heater circuit of the catalytic convertor oxygen sensor bank 2. Bank two implies that there is an issue in the bank of the engine that does not contain cylinders.

Oxygen_Sensor

Zirconium oxide is used as a sensing element that is coated with vented steel that is used to resist your O2 sensor. Platinum electrodes connect the sensing elements to the wires leads in the oxygen sensors harness. The oxygen sensor sends information to the PCM about the percentage of the oxygen particle in the engine exhaust comparing with the oxygen particle in the ambient air. That information is used by PCM to analyze the fuel delivery and the ignition timing of the engine.

The hot oxygen sensors use the battery voltage to preheat in the cold start condition. Voltage is supplied to the oxygen sensors until they reach a certain temperature and PCM enters closed-loop operation. Voltages route through the PCM with the help of fuses when the ignition switch is turned on during the cold start phase.

The PCM discontinues flowing of voltage to the oxygen sensors once the engine reaches the normal operating conditions. And when PCM detects a level of resistance in your oxygen sensor is higher than the particular range, it will generate the error code.

Possible causes of P0600 code

  • Fusible Blown oxygen sensor
  • The problem in the PCM
  • Faults in open circuit harness
  • The problem in oxygen sensors
  • Loss of relay response from engine to throttle
  • Hard starting engine

Symptoms of P0060 code

  • The poor economy of fuel consumption
  • Engine misfire at idle condition
  • Check engine light on
  • Poor work performance of engine until reaches operating temperature
  • Black fuel exhaust

How can the P0060 code affect vehicles?

The emission system computes the emission output through the reading of the oxygen sensors. The monitor of the vehicle will adjust the emission output according to the reading of the oxygen sensors of the vehicle.

If there are problems in the oxygen sensors of the vehicle, it will emit a higher amount of emission fuel which will cause a bad affect on the environment. Also if the emission level increases it will affect the life span of the catalytic convertor.

How to diagnose the P0060 code?

Oxygen_Sensor

It is easy to diagnose the error of this code. To diagnose the cause of P0060 Error code generation we need to check out the sensor wiring and also diagnose the circuits through the oxygen sensors. The internal parts of the circuits may be the possible reason for this code. So, all areas must be diagnosed thoroughly to detect. If you are a beginner you can use the manual or the booklet provided with the vehicle to detect the problem. You can do the required repairs by yourself or you can go for a mechanic.

How to troubleshoot the P0060 error?

The causes of the error code vary from vehicle to vehicle. Take your ride to the garage and get proper to take care of your vehicle with the professionals.