The transmission fluid dipstick is similar to the oil dipstick, while the oil dipstick measures the amount of engine oil in the car, while the transmission dipstick measures the amount of transmission fluid in your vehicle
Your transmission is as important as your vehicle’s engine. Without it, you can start the car, but not go anywhere fast. It is very important to keep your transmission in good condition and any important aspect of the safety of your vehicle starts with maintenance. Your transmission level can be determined by checking your transmission fluid level, color and odor. Good habits, such as a regular flush, apply your parking brake during parking and only work upside down at a full stop. Help extend the life of your transaction.
How to check the transfer fluid level?
The transmission fluid dipstick is similar to the oil dipstick, while the oil dipstick measures the amount of engine oil in the car, while the transmission dipstick measures the amount of transmission fluid in your vehicle. Keep in mind that low fluid intake can cause a lot of transfer problems. If the fluid is low, it may leak and should be found by a professional and repaired immediately. If you need to add extra fluid, be careful not to fill the reservoir. Excessive filling of the transmission fluid leads to an increase in pressure on the liquid foam and circulation, expelling the fluid from the vent or seal. It causes slipping and instability.
Park your car on a level surface and raise the hood.
Drive your car, park it and allow the engine to warm up for a few minutes. The transmission fluid rotates at room temperature and must be under normal operating conditions to obtain accurate results. If the fluid is checked when the engine is cold, it indicates that the fluid is low. Allow the machine to run continuously while checking the size.
Find your dipstick. Oil dipsticks for rear-wheel engines are often found on the front and rear of the engine, are labelled for easy use and may have a red, pink or yellow handle.
Remove the tip plastic and wipe with a clean cloth and place in the reservoir. Remove the tip again and mark the indicator on the rod to make sure the fluid is “full” or “low”. If it is filled with liquid, replace the dipstick and close the cap. If fluid is low, take your vehicle to the Auto repairing centre for refilling.
Things to look for when checking your transmission fluid
Color – Most fresh transfer fluids should be bright and transparent red. Dark red or beige is common, but indicates its age and use. The dark brown color is a sign of fluid change. However, black is a bad sign. This means that the fluid burns as a result of certain transmission problems. You should take your vehicle to a transmission specialist to determine the cause of the burning fluid.
Stability – After a while the fluid appears thicker than normal. This is normal, but good transfer fluid looks fresh. In addition, the fluid should not contain contaminants or particles, including metal shavings. Metal shavings should be declared problematic and inspected immediately. The presence of excess liquid indicates foam, which may overheat or add the wrong liquid.
Odor – Pure liquid is practically odorless, but dangerous if you notice something similar to a baked snack. The smell of burns, implant problems developed, should be given immediately to a specialist.
How often should the transmission fluid be tested?
In extreme weather, vehicles require less DLC, which means maintenance services need to be maintained regularly. The transmission fluid must be flown every 30,000 miles every six months to check the transmission fluid level. Now that you know how often to transfer and transfer your transfer fluid, you are one step closer to prolonging the life of your transfer.